Steam Coils, Steam Heating Coils & Steam Distributing Coils

Steam Coils, Steam Heating Coils & Steam Distributing Coils Fin Surface

Corrugated plate type fin that is die-formed. Fin collars are full-drawn to provide accurate control of fin spacing and maximum contact with tubes.

Fin Material Options:

Aluminum fin thickness of .008 inch standard with optional (.010). Optional copper fin thicknesses available are (.006) (.008) and (.010). Fins per inch available 6 through 14.Stainless Steel is also available up to .020 thick with helically wound fin.

Headers

Seamless copper with die-formed holes that provide a parallel surface to the coil tube for strong brazing joints. Other options are available: Stainless, Cupro-Nickel and Carbon Steel.

Connections

Red Brass Schedule 40 (MPT) is standard with optional Carbon Steel, Copper, Copper Nickel and Stainless Steel available. Options for FPT also available. Maximum fin length of 120 inches with same end connections. Fin length over 120 inches is recommended to have steam supplied at both ends. (Any fin height over 48 inches will have two supplies and two returns).

Casing

Using 16-gauge minimum thickness material, 1 1/2" flanges are die-formed to permit easy stacking and mounting. Intermediate tube supports are supplied on coils over 44" fin length with an additional support every 42" multiple thereafter.

Casing Material Options:

Full 16 gauge galvanized steel standard with optional stainless, aluminum and copper.

Testing & Performance

All coil assemblies are leak tested under water at 315 PSIG air. Standard construction is suitable for 30 PSIG steam pressure. Heavier wall, high pressure construction available up to 100 PSIG and beyond.

Steam Coils, Steam Heating Coils & Steam Distributing Coils